Aeroflow 100 Series Stainless Braided Hose

Aeroflow 100 series hose, a true double-braided stainless hose, that uses the highest quality stainless wire available. Ideal for use in fuel systems, using E85, E10, or Methanol fuels, also can be used with oils, lubricants, coolant and in vacuum applications.

Constructed with an outer stainless steel braid to protect the inner hose, resist abrasion and kinking. This is combined with a reinforced chlorinated polyethylene (CPE) synthetic rubber liner with a nylon internal braid.

Suitable for use Aeroflow 100, 150, 500 & 550 series hose fittings

Please Note: Due to the use of unknown additives in some fuels, we are unable to guarantee our rubber hose's compatibility with all fuels unless otherwise stated. We recommend the use of Aeroflow's PTFE series hose for all other types of fuels.

Please ensure all hose is thoroughly cleaned out before use. For all inlet/suction side of any pump, or when very tight bends must be made, please use the Aeroflow inner coil support spring.

NOT RECOMMENDED FOR: Brake systems, Power steering, Extreme heat areas and use inside passenger compartments (due to permeation). For these applications please use the Aeroflow 200 Series hose and compatible fittings.

• Compatible with E85, E10 & Methanol fuels
• Suits 100, 150, 500 and 550 Series fittings
• Operating temperature range -40 to 150°C
• Stainless braid resists abrasion & kinks
• Reinforced Chlorinated Polyethylene (CPE)