Schroth B40 brackets, commonly used in formula and prototype applications where there are no in-line adjusters on the lap belts. This bracket incorporates a 3 bar slide into the bracket, allowing you to adjust the length at the bolt in location. Note: you cannot adjust length once a driver is in the car.
Dimensions are 4mm thick, 94x76mm with a 13mm (1/2”) hole.
There is a slight 10° bend so that this bracket can be bolted directly to a fl at surface and leave room for webbing wrapped into it. This bracket can only be wrapped in to the belt end. If you require SFI 16.5 Approval, please select the Schroth B40 NC product.
FIA & SFI 16.1 approved
** CANNOT BE USED WITH FIA 8853-2016 HARNESSES **
- Genuine Schroth components
- Can be sewn into 3" harness belts
- NOT COMPATIBLE WITH FIA 8853-2016
