Schroth B63 bracket, commonly used in formula and prototype applications where there are no in-line adjusters on the lap belts. This bracket incorporates a 3 bar slide into the bracket – allowing you to adjust the length at the bolt in location. Note: you cannot adjust length once a driver is in the car.
Dimensions are 4mm thick, 68x72mm with a 13mm (1/2”) hole. There is a slight 10° bend so that this bracket can be bolted directly to a flat surface and leave room for webbing wrapped into it. This bracket can only be wrapped into the belt. If SFi 16.5 Approval is required, please use Schroth's B63NC part instead.
FIA and SFI 16.1 Approved
** CANNOT BE USED WITH FIA 8853-2016 HARNESSES **
