Aeroflow 400 series push lock hose, designed for use with the Aeroflow 400 and 510 series push-on hose end fittings. Fully submersible for petrol, in-tank applications, using E85 and Methanol fuels.
Available with either a black or b blue outer finish, perfect for maintaining original appearance. Suitable for use in fuel systems, E85, E10, methanol, oils, lubricants and cooling systems.
If used in oil systems, a hose clamp must be used if temperatures are above 70°C and if used in fuel injection systems, again, hose clamps should be fitted. Sizes available from -04 through to -12.
Suitable for use with Aeroflow 400 & 510 Series hose fittings
Please Note:Due to the use of unknown additives in some fuels, we are unable to guarantee our rubber hose's compatibility with all fuels unless otherwise stated. We recommend the use of Aeroflow PTFE series hose for all other types of fuels.
Please ensure all hose is thoroughly cleaned out before use. Use Aeroflow Aero Clamps to secure the hose to fittings.
NOT FOR USE WITH POWER STEERING OR TRANSMISSION AND OIL COOLER LINES
- Use with E85, E10 and Methanol fuels
- Use with 400 and 510 Series fittings
- Also suitable for oil & cooling systems
- Low temp/low pressure, no clamp needed
