AiM MXS Strada Race Car Dash Display with Icons

AiM MXS Strada racing dash display system with icons. This full is a colour, high-contrast, 5" TFT dash display, developed for race street and race car/bike installations which are fully configurable. It comes with two loom options, CAN or OBDII. You can configure alarm LED's, choosing colour, blinking frequency and defining the logic for turning them on or off.

The MXS Strada is the evolution of MXL Strada, one of the most widely-spread dashes on tracks and streets all over the world. The MXS Strada has a 5″ color display with great visual impact, configurable to show lap times and all the info coming from the Engine Control Unit, analog/digital inputs, pre-defined math channels and optionally, a GPS Module. It's data sampling capability can also be incremented adding up to eight expansion modules.

MXS Strada ECU Connection

AiM systems acquire data from the ECU of your vehicle. The list of available ECU drivers is constantly updated and upgraded on our support site and are published here. The support site includes over 1,000 different ECU’s both Stock and Racing. They are sorted by manufacturer/vehicle model and for each ECU you find the proprietary communication protocols, including the standard OBDII ones. From a hardware point of view, Aim systems manage the following data lines:

• CAN
• RS232
• K-Line

MXS Strada Analog Digital Inputs

Aim systems analogue inputs are recorded up to 1,000 times per second each. You can connect and monitor all kinds of sensors, like:

• Ratiometric Potentiometers
• Pressure Sensors
• Thermo-Resistances
• K-type Thermocouples

and many others, all your custom sensors included.

Aim systems also feature digital inputs:

• Speed signals – From the ECU, from the GPS and from the wheel sensors
• RPM – From the ECU or from a digital input connected to a square wave signal (8 to 50 V)
  (or to a low voltage (from 150 to 400 V) of the coil)
• Lap signal – Lap and split times are sampled by the GPS or via optical receiver/transmitter

MXS Strada Second CAN

An innovative AiM MXS Strada Car Dash Display feature is it's CAN2 line, managing data coming from your additional modules (i.e. ABS, traction control, infrared temperature sensors and more). This feature meets the requirements of a growing number of race drivers as the use of additional modules is becoming quite common in a number of race series.

MXS Strada Math Channels

AiM systems gives you Math Channels values straight away and the dash logger can be configured to display those values (i.e. brake bias, calculated gear) all in real time.

High Contrast TFT Display

The AiM MXS Strada shows with RPM scale, all the data you need, like speed, water temperature and oil pressure, lap times and much more. You can choose the custom pages you wish, including up to four additional fields.

A wide library of page styles, defining which data to be shown, their end of scale and measured units. Swapping between pages is quite easy with the Aim MXS Strada using the push buttons provided.

Watch Your Data in Pre-Configured Pages

The MXS Strada has a high contrast TFT display and its visual quality is always optimal, as its ambient light sensor keeps the backlight at the best brightness levels. This dash is supplied with the 'Street Icons' as required by street users (fuel, oil, water temp etc.)

Flexible Shift Lights and Alarms

The ten multi-coloured RGB shift lights on the MXS Strada can be customised to your liking to define the RPM threshold for each single gear. The same flexibility applies to the configurable RGB alarm LED's. You can configure them in order to turn them on/off depending on analog or digital inputs, ECU values, expansion values, math channels or, optionally, GPS information. You choose conditions and colours and you can select a solid alarm or flashing one and the flashing frequency. It is also possible to configure an accompanying text message along with the alarm priorities.

CAN Output

With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities.

Two Digital Outputs

AiM MXS Strada features a LOW SIDE type (switch to ground) digital output configurable in order to be activated/deactivated depending on the value of the analogue / digital inputs or on impulses coming from the ECU. This permits to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens.

Switch Input Module

The Switch Input Module is a small compact Sim input device produced by us in the UK which provides a simple way to input voltage signals to the dash. The module allows for connection of lights, left and right indicators, dipped beam, main beam, hazard warning, in fact up to 14 independent voltage inputs, that are then sent to the display or logger through the CAN II stream, allowing you to turn on the symbols or lights on the display.